Teaching Experience 

Industry Experience

International Journal Papers

1. Singh, V. P, Kumar, R., Dwivedi, R. K., Kuriachen, B, Anand K. N., 2022, “Influence of Toughness and Retained Austenite on Wear Behaviour of Carbide Free Bainite in High Silicon Steel.” Transactions of the Indian Institute of Metals. DOI: 10.1007/s12666-022-02818-9

2. Anand, K. N., Vipindas, K., and Mathew, J., 2021, “Microstructure Evolution based Force Model and Surface Characteristic Studies of Inconel 718 during Micro Endmilling.” Machining Science and Technology, 25(6), 875-898.

3. Anand, K. N., and Mathew, J., 2021, “Size Effect and Micro Endmilling Performance while Sustainable Machining on Inconel 718,” Materials and Manufacturing Processes, 36(6), pp. 668-676.

4. Anand, K. N., and Mathew, J., 2020, “Studies on Wear Behavior of AlTiN-Coated WC Tool and Machined Surface Quality in Micro Endmilling of Inconel 718,” International Journal of Advanced Manufacturing Technology, 110(1–2), pp. 291–307.

5. Anand, K. N., and Mathew, J., 2020, “Evaluation of Size Effect and Improvement in Surface Characteristics Using Sunflower Oil-Based MQL for Sustainable Micro-Endmilling of Inconel 718,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(4), pp. 1–13.

6. Vipindas, K., Anand, K. N., and Mathew, J., 2018, “Effect of Cutting Edge Radius on Micro End Milling: Force Analysis, Surface Roughness, and Chip Formation,” International Journal of Advanced Manufacturing Technology, 97(1–4), pp. 711–722.

Book Chapters

1. Anand, K. N., Venkatesh, G., Mathew, J., 2019, “Investigations on the Influence of Size Effect on Surface Characteristics during Micro Endmilling of Inconel 718,” Advances in Micro and Nano Manufacturing and Surface Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer. pp. 177-187.

2. Ankit, A., Anand, K. N., Mathew, J., 2019, “Analysis of Effect of Heat Treatment on Machining Characteristics during Micro Endmilling of Inconel 718,” Advances in Micro and Nano Manufacturing and Surface Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer. pp. 391-399.

International Conference Papers

1. Anand, K. N., Vipindas, K., Jiju V. E., Mathew, J., 2019, “Modeling and Simulation of Cutting Temperature during Micro Endmilling on Inconel 718,” 11th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 11), IIT Indore.

2. Anand, K. N., Ankit, A., Mathew, J., 2017, “Modeling and Experimental Investigation of Material Microstructure Effects on Cutting Force and Surface Roughness during Micro Endmilling on Inconel 718,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), IIT Madras, pp. 345-348.

3. Anand, K. N., Ankit, A., Somashekar, K. P., Mathew, J., 2017, “Finite Element Modeling and Experimental Investigation of Micro Endmilling Forces on Aerospace Alloy,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-10), IIT Madras, pp. 305-308.

4. Vipindas, K., Anand, K. N., and Mathew, J., 2016, “Effects of Tool Wear on Surface Roughness, Burr Formation and Cutting Force during Micro End Milling on Ti-6Al-4V,” Proceedings of 6th international & 27th All India Manufacturing Technology, Design and Research conference (AIMTDR), College of Engineering Pune, India, pp. 1569-1574.

5. Vipindas, K., Anand, K. N., Anchana, P., and Mathew, J., 2016, “Modeling and Experimental Investigations of Temperature Distribution during Micro Machining of Titanium Alloy,” Proceedings of 6th international & 27th All India Manufacturing Technology, Design and Research conference (AIMTDR), College of Engineering Pune, pp. 1565-1568.

6. Vipindas, K., Anand, K. N., Jayakumar, K., and Mathew, J., 2015, “Modeling and Experimental Investigation of Cutting Forces during Micro End Milling on Titanium Alloy,” International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-9), IIT Bombay.

7. Vipindas, K., Anchana, P., Anand, K. N., and Mathew, J., 2015, “Characterization of Chip Geometry and Surface Roughness during Micro End Milling on Ti-6Al-4V,” International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-9), IIT Bombay.

1. Attended an FDP on "OUTCOME BASED EDUCATION" organised by the Department of Mechanical Engineering, Jyothi Engineering College, Thrissur from January 30 to February 3, 2023.

2. Attended an FDP on "NANOTECHNOLOGY" organised by the Department of Mechanical Engineering, Jyothi Engineering College, Thrissur from January 9 to 13, 2023.

3. Attended an FDP on "Reinventing the process of Teaching Learning" organised by  Jyothi Engineering College, Thrissur from August 6 to 8, 2022.

4. Attended and acted as a volunteer for a two-day online workshop on "3D Printing Solution for Medical Innovation (3DPSMI-2021)" organised by the Department of Mechanical Engineering, NIT Calicut in collaboration with MVR Cancer Research Centre, Calicut during 17-18 July 2021.

5. Attended one-week TEQIP-III sponsored short term course on “Advanced Manufacturing Processess & Applications” from 24th to 28th August 2020 organized by the Department of Mechanical Engineering, Malaviya National Institute of Technology Jaipur.

6. Attended a Five days Online Short Term Course on “Modeling Approach in Micro Machining Processes” Organized by the Department of Mechanical Engineering, School of Technology, Pandit Deendayal Petroleum University, Gandhinagar from 26th to 30th October 2020.

7. Attended a webinar on "Micromachining and its Applications" organised by the Department of Mechanical Engineering, Adi-Shankara Institute of Engineering and Technology on 17 July 2020.

8. Student coordinator for the Advanced CAD/CAM Training Programme organised by Department of Mechanical Engineering, NIT Calicut (2018-19)

9. Attended and acted as a volunteer/trainer for ABAQUS software during the Advanced CAD/CAM Training Programme organised by the Department of Mechanical Engineering, NIT Calicut (2018-19)

10. Attended a training programme on "Burr management in Machining" by IMTMA (Indian Machine Tool Manufacturers' Association) during 8-9 August 2017 at Pune

11. Participated in a QIP Programme on "Realizing Science and Application of Micro-Nano Machining" organised by IIT Bombay during December 18-20, 2017.

12. Attended a workshop on "Precision Manufacturing and Its Applications" organised by the Department of Mechanical Engineering, IIT Madras on December 6, 2017.

13. Attended a workshop on "Industrial Tribology and Its Recent Advances in Engineering" organised by the Department of Mechanical Engineering, NIT Calicut from October 21 to 23, 2016.

14. Attended an FDP on "Recent Advances in FEM to Solve Complex Engineering Problems" organised by the Department of Mechanical Engineering, NIT Calicut from July 19-25, 2016.

15. Attended a workshop on "Product Design" organised by the Department of Mechanical Engineering, NIT Calicut from February 16-18, 2016.

16. Attended and acted as a volunteer/trainer for the Advanced CAD/CAM Training Programme organised by the Department of Mechanical Engineering, NIT Calicut (2015-16)

17. Presented project on "Through the Eyes of Da-Vinci" for an exhibition conducted by College of Engineering Trivandrum from September 14 to 17, 2012.